How to Remove the Starter on a 1981 El Camino

Things You'll Need:

• Jack
• Jack stands
• Open-end wrench set
• 3/8-inch ratchet, extension and socket set

1. Open the hood and disconnect the negative post from the battery, using an open-end wrench. Do the same for the positive post, then lift up the front of the car, using the jack, and set it down on the jack stands.
   
2. Locate the starter on the driver's side of the engine, where the engine connects to the transmission. Disconnect each wire from the starter, using an open-end wrench.
   
   
3. Unbolt the bracket from the side of the starter, using the ratchet, then remove the heat shield in the same manner (if so equipped).
   
   
4. Unbolt one bolt from the starter, using the 3/8-inch ratchet, extension and sockets. Support the starter with one hand, then unbolt the remaining bolt; lower the starter carefully from the engine.